Chimney Pot Replacement in Burgess Hill
Chimney pot replacement in Burgess Hill for cracked, loose or missing pots. We fit new pots and bed them in fresh flaunching, with free, no-obligation quotes and no call-out charge.
- No call-out charge
- Free, no-obligation quotes
- Same day response
- 24/7 emergency call-outs
Chimney pot replacement in Burgess Hill
- 01
Why pots need replacing
Clay chimney pots crack with frost and age, and the mortar holding them can break up until they work loose. A cracked pot lets water into the flue, and a loose one can fall from the roof in high winds, which is a real danger to anyone below.
- 02
Flaunching holds them in place
Flaunching is the sloped mortar cap on top of the stack. It holds the pots firmly and sheds rain off the top of the chimney. When we replace a pot, we renew the flaunching too, because old flaunching is usually the reason the pot came loose.
- 03
Matching or changing the pot
We can match your existing pots in style and colour, or fit a different type if you prefer. If the chimney is no longer used, we can fit a capped pot or a pot with a cowl, which keeps rain out while still letting the flue breathe.
What to expect from chimney pot replacement
We check the pots, flaunching and the top of the stack, and talk through which pots you'd like. If the chimney serves a fire or boiler, we make sure the new pot suits it. Your free quote covers the pots, new flaunching and any access needed.
Once access is safe, we remove the old pots and break out the worn flaunching. The new pots are set in place and bedded in fresh flaunching, sloped so rain runs off the stack. We check the brickwork and flashing while we're up there and clear all the debris away.
What's included
- Pots, flaunching and stack top checked
- Old pots and flaunching removed
- New pots to match or your choice
- Fresh flaunching sloped to shed rain
- Caps or cowls for unused flues
- Debris cleared from roof and gutters
How it works
Call or send a message
Tell us about the leak, the damage or the job you have in mind. We aim to respond the same day.
We inspect and quote
We look at the roof, explain what we find and give you a free, no-obligation quote before any work starts.
Work done and checked
We carry out the repair or installation, then test and check the finished work before we leave.
Chimney pot replacement questions
Is a loose chimney pot dangerous in Burgess Hill?
Yes, it can be. A loose or cracked pot can fall in strong winds and cause serious damage or injury below. If you notice a pot leaning, moving or missing pieces, keep people away from the area underneath and call us so we can make it safe.
Can you replace just one chimney pot?
Yes. If only one pot is damaged, we can replace that one and match it to the others. We usually renew the flaunching around all the pots at the same time, because if one pot has come loose the flaunching holding the others is often worn too.
What chimney pot do I need for a wood burner?
A wood burner or other appliance needs a pot that suits its flue, often with a liner fitted inside. The installer of your appliance should confirm what's needed. We'll fit the right pot for your setup and won't fit a capped pot on a flue that's still in use.
How long does chimney pot replacement take?
Replacing a pot and renewing the flaunching is usually done in a few hours to a day, once safe access is in place. The flaunching needs a dry spell to set properly, so we plan the work around the forecast. We'll confirm the timing when we quote.
Chimney pot replacement across Burgess Hill and nearby
We replace chimney pots in Burgess Hill and the areas below.
Other chimney services in Burgess Hill
- Chimney Repairs
- Chimney Leak Repairs
- Chimney Rebuilding
- Chimney Repointing
- Chimney Stack Removal
- Chimney Flashing Repairs
- Chimney Cowl Fitting
We also offer:
Book chimney pot replacement in Burgess Hill
Cracked or leaning chimney pot? Give us a call or send a photo and we'll arrange to replace it.