UPVC Cladding Installation in Burgess Hill
UPVC cladding installation in Burgess Hill for dormers, gable ends, bay tops and porches. A weatherproof finish that never needs painting, with free, no-obligation quotes before any work starts.
- No call-out charge
- Free, no-obligation quotes
- Same day response
- 24/7 emergency call-outs
Upvc cladding installation in Burgess Hill
- 01
Where cladding is used
uPVC cladding covers areas around the roof that are often clad in timber or tiles: dormer cheeks and fronts, gable ends, the tops of bay windows, porches and small extensions. It gives these areas a clean, weatherproof finish that matches your fascias and windows.
- 02
Replacing tired timber cladding
Painted timber cladding needs regular sanding and repainting, and once water gets in it starts to rot. Replacing it with uPVC removes that upkeep. We take off the old cladding, check the timber frame behind it and repair anything that's soft before fitting.
- 03
Styles and finishes
uPVC cladding comes in different profiles, such as shiplap and tongue and groove, and in white, grey, black and woodgrain finishes. We'll help you choose a style that suits the house and ties in with the windows, fascias and soffits.
What to expect from uPVC cladding installation
We look at the area to be clad, check the condition of the existing cladding and the frame behind it, and measure up. You choose the profile and colour, and we give you a free quote that includes trims, corners and any access needed.
We remove the old cladding and repair any rotten timber. A breathable membrane and treated battens go on where needed, then the cladding is fitted with matching trims at the corners and edges so water can't get behind it. We clear the site and take the old materials away.
What's included
- Old cladding removed
- Timber frame checked and repaired
- Breathable membrane and battens
- Your choice of profile and colour
- Matching corner and edge trims
- Old materials taken away
How it works
Call or send a message
Tell us about the leak, the damage or the job you have in mind. We aim to respond the same day.
We inspect and quote
We look at the roof, explain what we find and give you a free, no-obligation quote before any work starts.
Work done and checked
We carry out the repair or installation, then test and check the finished work before we leave.
UPVC cladding installation questions
How much does uPVC cladding cost in Burgess Hill?
The price depends on the area to be clad, the profile and finish you choose, the condition of the frame behind and the access needed. A small porch costs much less than both cheeks of a large dormer. We measure up and give you a free quote first.
Can uPVC cladding be fitted to a dormer?
Yes. Dormer cheeks and fronts are one of the most common places for uPVC cladding. It replaces tired timber or tiles with a neat, low-maintenance finish. We check the dormer's timber frame and the flashings around it while the old cladding is off.
Does uPVC cladding fade or need painting?
No, uPVC cladding never needs painting. Good quality cladding is made to resist fading from sunlight, although bright colours on very exposed walls can soften slightly over many years. An occasional wash with warm soapy water keeps it looking clean and fresh.
Can you match new cladding to my uPVC fascias?
Usually, yes. Cladding comes in the same common colours and finishes as uPVC fascias and soffits, so we can match or complement what's already on the house. If we're replacing your fascias too, we can fit everything in matching colours.
UPVC cladding installation around Burgess Hill
We fit uPVC cladding in Burgess Hill and the surrounding areas below.
Other gutter services in Burgess Hill
We also offer:
Book uPVC cladding installation in Burgess Hill
Tired timber on your dormer or gable? Call us or send a photo for a free cladding quote.