
Felt roofing in Burgess Hill for garages, sheds, outbuildings and extensions. Modern torch-on felt laid in layers for a proven, cost-effective flat roof, with free quotes and no call-out charge.
Older felt roofs were often a single thin layer stuck down with hot bitumen, and many failed within a few years. Modern torch-on felt is much tougher. It's built up in layers, with a mineral-finished cap sheet on top that protects it from sunlight and wear.
A typical felt roof has a base layer bonded to the deck and a cap sheet on top, sometimes with a middle layer between. Each layer is torched down so the bitumen melts and fuses to the one below, giving a solid, waterproof covering with sealed joins.
Felt is a good value option for garages, outbuildings and extensions, and it's quick to repair if it's ever damaged. On roofs close to timber cladding or in tight spaces where a torch isn't suitable, we may suggest a cold-applied system such as EPDM instead.
We inspect the roof and deck, check the fall and give you a free quote. The old roof is stripped back and any rotten boards are replaced. Because torch-on felt is laid with a flame, we check the area for anything flammable and keep fire safety equipment on hand throughout.
The base layer goes down first, then the cap sheet, with joins overlapped and sealed. Upstands against walls are dressed up and finished, and edge trims fitted so rain runs off into the gutter. Once it's finished, we check every join and clear the site. Most garage roofs take a day.
Tell us about the leak, the damage or the job you have in mind. We aim to respond the same day.
We look at the roof, explain what we find and give you a free, no-obligation quote before any work starts.
We carry out the repair or installation, then test and check the finished work before we leave.
A modern torch-on felt roof, laid in layers with a mineral cap sheet, lasts much longer than older single-layer felt. Its life depends on the quality of fitting, the fall and how exposed the roof is. Keeping gutters clear and checking it after storms helps it last longer.
Felt is often the most cost-effective of the three, especially on garages and outbuildings. The difference depends on the roof size and shape. We can quote for felt, EPDM and fibreglass side by side, so you can compare price and features before you decide.
Yes, if the damage is limited. Splits, small blisters and lifted edges can often be repaired by cutting out the damaged area and torching on a new patch. If the felt is cracked and brittle across the whole roof, replacing it is better value than repeated repairs.
Yes, when it's done carefully. We check the area for anything that could catch, protect nearby timber and keep fire safety equipment on hand while we work. Where a flame isn't suitable, such as right next to timber cladding, we'll recommend a cold-applied system instead.
We lay felt roofs in Burgess Hill and the surrounding areas listed here.
We also offer:
Garage or shed roof letting water in? Give us a call or send a photo for a free felt roofing quote.