Our chimney service in Burgess Hill covers repairs, leaks, repointing, rebuilds, new pots and cowls, and stack removal. There's no call-out charge, and every quote is free with no obligation.
Here's what each of our chimney services covers. Tap a service to find out more.
Chimneys sit high up and take the worst of the wind and rain, so loose bricks, cracked flaunching and damaged pots are common. We inspect the whole stack, explain what needs attention and repair it before small faults turn into damp indoors. See what a chimney repair covers.
More about chimney repairsDamp on a chimney breast or ceiling near the stack usually comes from failed flashing, porous brickwork or a cracked crown. We work out which one is letting water in, because each needs a different fix. Read how we trace and stop chimney leaks in Burgess Hill homes.
More about chimney leak repairsWhen a stack is leaning, badly cracked or crumbling, repairs may no longer be safe. Rebuilding means taking it down to sound brickwork and building it back up, reusing good bricks where possible so it still matches the house. Find out when a rebuild is the right call.
More about chimney rebuildingMortar between chimney bricks wears away over time, leaving gaps where rain gets in and frost does damage. Repointing means raking out the old mortar and filling the joints with fresh mortar. It's often the simplest way to protect a stack. See how repointing works.
More about chimney repointingIf you no longer use a chimney, removing the stack can stop ongoing leaks and maintenance. We take the stack down, then tile or slate over the gap to match the rest of the roof. Removing a chimney breast inside is a separate job. Learn what stack removal involves.
More about chimney stack removalFlashing is the strip, usually lead, that seals the joint between the chimney and the roof covering. When it lifts, splits or comes loose, water runs straight down into the loft. We refit or replace it so the joint is watertight again. Read more about flashing repairs.
More about chimney flashing repairsA cracked or loose chimney pot can let water in and is a hazard if it falls. We replace damaged pots and re-bed them in fresh flaunching, the sloped mortar cap that holds them in place and sheds rain. Find out how we replace pots on homes around Burgess Hill.
More about chimney pot replacementA cowl sits on top of the pot to keep out rain, birds and debris, and some types help a fire draw better. If a chimney is no longer used, a capping cowl still lets air through to keep the flue dry. See which cowls we fit and when you might need one.
More about chimney cowl fittingChimney work is done at height, so it needs safe access and someone who understands how chimneys and roofs fit together. Ask what's causing the problem, what the repair will involve and whether scaffolding is needed, and make sure the quote is in writing before any work is booked.
Our chimney service is run from our base in Burgess Hill. We inspect the stack, explain what we find and give you a free, no-obligation quote, with no call-out charge for the visit. Every job is tested and certified before we leave, and we aim to respond the same day.
Tell us about the leak, the damage or the job you have in mind. We aim to respond the same day.
We look at the roof, explain what we find and give you a free, no-obligation quote before any work starts.
We carry out the repair or installation, then test and check the finished work before we leave.
Common signs include damp patches on a chimney breast or nearby ceiling, crumbling mortar, loose or leaning bricks, a cracked or tilting pot, and bits of brick or mortar in the gutter or fireplace. If you notice any of these, it's worth having the stack looked at before the damage spreads.
Usually, yes. Most chimney repairs need a safe working platform around the stack, which normally means scaffolding or a chimney scaffold. Some small jobs can be reached another way. We'll explain the access your job needs and include it in your quote, so there are no surprises later.
Yes. Disused chimneys still need looking after, because they can leak and decay just like working ones. Depending on its condition, we can repair it, fit a capping cowl to keep it dry and ventilated, or remove the stack above the roof so it no longer needs maintaining.
Most chimney work happens outside on the roof, so there's little disruption indoors. If we need to get into the loft to check for water damage or look at the flashing from underneath, we'll let you know beforehand and keep the area covered and tidy while we work.
We look after chimneys in Burgess Hill and the surrounding villages. Pick your area to see more.
Tell us what you've noticed on or around your chimney and we'll arrange a time to take a look. Quotes are free.
